VidaBox Slim Guia de Instalação descarregar pdf (Página 15)

INSTALLATION

 Connect the Audio Output

Every VidaBox™ SLIM™ comes with a high-quality set of L/R RCA audio cables

and 3.5mm converter for 2.0 stereo sound. If you wish to connect the audio output of

your SLIM™ differently, please purchase the appropriate cables from your local dealer,

or through our online store.

 Which Audio Output / Cable Are You Using?

If you are using…

· 2.0 RCA (L/R) stereo sound RCA cables, or

· A direct 3.5 to 3.5mm stereo sound cable, or

· 5.1/7.1 analog surround sound cables –

Go to Connecting via Analog Sound

· Digital Optical/Coaxial Cable –

Go to Connecting via Digital Sound

Connecting via Analog Sound:

1. Do not connect any audio cables at this time. You will do so while configuring the

software, which will be covered in the next manual –

Software Configuration

Connecting via Digital Sound

There are two SPDIF outputs for the SLIM™ - coaxial & optical. You can choose to

use either output – but do not use both at the same time. The coaxial outputs use an

RCA cable, and the optical output uses a TOSLink cable, as depicted below.

Coaxial SPDIF (RCA) Cable

Optical SPDIF (TOSLink) Cable

1. Plug one end of the SPDIF cable

into the G SPDIF-Out port.

2. Plug the other end of the SPDIF cable into your receiver.

3. That’s it! The audio is now connected from the VidaBox™ to the receiver.



You have completed the audio output installation!



The SPDIF

output

There are two types of

cables, as shown. If you

choose to use the

SPDIF-output, you only

need to use one of the

two outputs, not both.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20

Sem comentários

VidaBox Slim Guia de Instalação Página 15